Mirror Cell Designer

Starting…

Mirror

Mirror thickness

Tube Tube inside diameter Tube wall thickness sets tube-screw length only Rear plate 3 spokes print smaller

Units for these inputs

Mirror retention

Cooling fan Fan on rear plate

Printer Bed size (mm, square)

Advanced

Tube fit clearance diametral, mm Min. plate gap mm (rounded up to suit a standard bolt) Collimation travel ± mm at each pair Mirror edge gap radial, mm Clip gap above mirror mm Push-pull lock preload N per bolt; sizes the plates

Status

Export

All parts

Docs

Loading the CAD kernel from the CDN…
(about 23 MB the first time; cached afterwards)

Dimensioned layout generated from the same numbers as the solids. All dimensions in mm. Hole letters refer to the hole schedule on the Dimensions & BOM tab.